Description
4K Video and Audio Distribution
HDMI-TPS-TX97 and HDMI-TPS-RX97 twisted pair HDBaseT™ compatible extenders provide extension of uncompressed 4K/UHD video with embedded audio (up to eight channel PCM or HBR audio) for long distances over a single CATx cable. The unit offers bi-directional RS-232, IR, and Ethernet pass-through on the same CATx cable that carries the video signal. The TPS extenders support full HDCP and EDID compliance and work on all standard AV resolutions up to 4K and 48-bit color depth handling all standard audio formats and also 120 Hz 3D signals. PoE 48V remote powering is available through a single CATx cable, but a local power supply can also be used. All devices can be mounted on a rack shelf or used standalone.
Simplified Setup with Automatic Configuration
The auto operation mode allows the device to detect the far end extender’s mode and adopt it. If the far end device is in Auto mode or it is a third party HDBaseT™ device the link will be set to HDBT mode. If the far device is in forced Long Reach Mode then the auto operation will set the Link to Long Reach Mode. The IR OUT can operate in either Wired (unmodulated) or Emitter (modulated) mode.
Universal Compatibility for Diverse Systems
HDMI-TPS-TX97 and HDMI-TPS-RX97 are compatible with HDBaseT™ extenders and matrix switchers.
Highlight Features
- Single-Link DVI and HDMI extension supporting 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) and 3D capabilities
- Extends Single-Link DVI or HDMI + Ethernet + RS-232 + IR over one CATx cable to up to 170m* transmission distance
- 10/100 Ethernet transmission
- Bi-directional RS-232 and IR
- HDCP compliant, CEC, EDID transparent
- Operation mode switch (Auto or forced Long Reach Mode)
- IR out mode switch (Wired / Emitter)
- Can be remote powered through CATx cable (PoE PD)
*Depends on cable category and quality
Features
- DVI and HDMI extension over a single CAT7 cable
- Two available operation modes to maximize potential cable length
- Operation mode switch (Auto or forced Long reach mode)
- Low power mode in Auto operation mode
- 10/100 Ethernet extension
- Bi-directional RS-232 pass-through
- Bi-directional IR pass-through
- Supports all DVI resolutions up to 1080p or 1920×1200
- Supports all HDMI 1.4 resolutions
- Compatible with 120 Hz 3D video signals
- Remote powered through CATx cable
- HDCP 2.2 compliant, CEC, EDID transparent
- Uncompressed video/audio up to 10,2 Gbps
- Live, Link detection, Video and HDCP detection LEDs
- Rack mounting options
- Locking DC connector
Hardware Specifications
Video
- Data rate: 3.4 Gbps per color
- Resolution: All HDMI 1.4a resolutions supported
- Equalization: Adaptive, automatic
- EDID support: Transparent
- HDCP pass through: Yes
- Ethernet pass-through: Yes
- RS-232 pass through: Yes
- IR pass through: Yes
- Overall signal delay: 10µs (including 100m CATx cable)
General
- Power: Universal power adaptor, DC 12 V 2.5 A OR PoE 48V
- Power consumption (-RX): 5.3 W (typ) 6.1 W (max)
- Enclosure: 1 mm metal
- Dimensions: 100.4 W x 100.4 D x 26 H mm
- Weight: 330 g / product
- Compliance: CE
- Warranty: 3 years
Connectors
- TX input, RX output: HDMI connector
- TX output, RX input: RJ45 (TPS interface)
- Ethernet: RJ45
- IR In, out: 3.5mm TRS connector (1/8’’ mini-jack)
- Serial port: 3-pole PHOENIX
- Power: Locking DC connector (2.1 / 5.5 mm)
Max Cable Lengths with the Available Firmware Versions
| Resolution | Pixel Clock Rate | Cable Lengths (Auto / LR Link Mode) | ||
|---|---|---|---|---|
| CAT5e AWG24 | CAT7 AWG26** | CAT7 AWG23 | ||
| 1024×768 @ 60Hz | 65 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
| 1280×720p @ 60Hz | 73.8 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
| 1920×1080p @ 60Hz / 24bpp | 148.5 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
| 1920×1200 @ 60Hz | 152.9 MHz | 100 m / NA | 90 m / NA | 120 m / NA |
| 1600×1200 @ 60Hz | 162 MHz | 100 m / NA | 90 m / NA | 120 m / NA |
| 1920×1080 @ 60Hz / 36bpp | 223,6 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
| 3840×2160 @ 30Hz UHD | 297 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
| 4096×2160 @ 30Hz 4K | 297 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
* With long reach firmware option. Long reach firmware supports pixel clock frequencies up to 148.5 MHz.
** Distances are 20% shorter if remote powering is used. AWG26 cables are not recommended with remote powering.
Supplied Accessories
- 1x Phoenix plug, 3 pins, flat
- 1x Safety and warranty info, quick start guide
- 1x PSU-12VU (12V DC 2A, 5.5-2.5 DC plug)
