Description
Supporting 5K
Taurus devices deliver flawless switching for 5K 21:9 ultrawide displays, unlocking a new level of visual performance for modern meeting and control environments, suppporting 5120×2160 resolution via HDMI 2.0 at 30Hz 4:4:4 or 60Hz 4:2:0. Designed to enhance layouts like Microsoft Teams Front Row and other collaboration platforms, Taurus provides expanded screen real estate for design, data visualization, and multi-window workflows. With uncompressed HDMI 2.0 video and ultralow latency, it’s the ideal choice for simulation, engineering, broadcast, and executive boardroom applications.
UCX-2X1-TPX-TX20 Features
- Single CAT connectivity between TX and RX devices, up to 100m, with Power delivery from TX to RX, Video, USB2.0, Ethernet, OCS and Serial
- USB-C input connectivity on the TX device for 4K Video, Audio, Data, and Power (Video, Audio, Data and Power over a single USB-C connection)
- USB-C charging up to 100W on the TX
- Multiple USB 2.0 connectivity for any type of USB device (Camera, speakerphone, touch monitor, USB-HID devices etc.) Both on the TX and the RX
- Independent USB Host switching layer for multiple USB hosts, up to 8 devices (4x at the TX side, 4x at the RX side)
- Room device control via Ethernet (TCP/IP) or Serial (2x at TX device, 1x at RX device)
- Multiple Ethernet network configurations fitting various corporate network topologies and IT security standards (e.g. 802.1x compliance)
- SSH, SSL, and HTTPS for IT security
- Occupancy sensor (OCS) connection at the RX device (with 24V power supply), GPIO control ports at TX device
- Welcome Screen for custom corporate logo and on-screen display warning messages
- CEC at the HDMI outputs
- Audio de-embedding
- Supports uncompressed HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps, 600 MHz pixel clock)
- Supports Lightware Advanced Room Automation (LARA)
UCX-3×3-TPX-RX20 Features
- Independent USB host switching layer for multiple USB hosts, supporting up to 8 devices (4× TX side, 4× RX side)
- Local HDMI 2.0 and USB 3.1 Gen 1 connectivity for Room PC and other room equipment
- Single CAT connectivity between TX and RX devices for video, USB 2.0, Ethernet, OCS, GPIO, and serial
- Multiple USB connectivity for cameras, speakerphones, touch monitors, USB-HID devices, and other USB peripherals
- Three independent HDMI 2.0 outputs
- Room device control via Ethernet (TCP/IP), serial, GPIO, or OCS
- CEC support at the HDMI outputs
- Supports HDMI 4K signal formats up to 4K UHD @ 60 Hz, RGB 4:4:4, and 18 Gbps
- Welcome Screen for custom corporate logos and on-screen warning messages
- Multiple Ethernet network configurations for various corporate network topologies and IT security standards, including 802.1X compliance
- SSH, SSL, and HTTPS support for IT security
- Audio de-embedding
Hardware Specifications
UCX-2×1-TPX-TX20
Video
- USB-C Input:
- Connector type: 24-pole USB Type C receptacle
- A/V standard: DP 1.2a
- HDCP compliance: HDCP 1.4, HDCP 2.2
- Color space: RGB, YCbCr
- Video delay: 0 frame
- Maximum video resolution: 4096×2160@60Hz RGB 4:4:4 (up to 600MHz pixel clock); 1920×1080@120Hz, 36 bit
- Audio formats: All formats in line with HDMI 2.0 standard
- 3D support: Yes
- HDMI Input:
- Connector type: 19-pole HDMI Type A receptacle with screw locking option
- A/V standard: DVI 1.0, HDMI 1.4, HDMI 2.0
- Maximum data rate: 18 Gbps
- Maximum pixel clock: 597 MHz
- HDCP compliance: HDCP 1.4, HDCP 2.2
- Color space: RGB, YCbCr
- Video delay: 0 frame
- Maximum video resolution: 4096×2160@60Hz RGB 4:4:4 (up to 600MHz pixel clock); 1920×1080@120Hz, 36 bit
- 5K Resolution: 5120×2160 HDMI 2.0: 30Hz 4:4:4 or 60Hz 4:2:0
- Maximum input HDMI cable length: 5 m at 3840×2160@60Hz 4:4:4 with premium certified cable
- Re-clocking: Pixel Accurate Re-clocking
- 3D support: Yes
- TPX Output:
- Connector type: RJ45 connector
- Power over Ethernet: PoE+ PSE (IEEE802.3at)
- Data rate: 10GBase-T
- Compliance: AVXT
- HDCP compliance: HDCP 2.3
- Transferred signals: Video, Audio, USB 2.0, RS-232, OCS, Ethernet
- Color space: RGB, YCbCr
- Supported resolutions at 8 bits/color: Up to 4096×2160@60Hz (4:4:4)
- Audio formats: 8-channel PCM, Dolby TrueHD, DTS-HD Master Audio 7.1
Audio
- Audio mode: Simultaneous pass-through and de-embedding to the Audio layer
- Supported audio formats for pass-through: All HDMI 2.0 audio formats
- Supported audio formats for de-embedding:
- Uncompressed
- Compressed: Dolby Digital, DTS
- Compressed HBR: Dolby TrueHD, DTS-HD
- Analog Audio Output:
- Connector type: 5-pole Phoenix connector
- Audio formats: 2-channel PCM
- Sampling frequency: 48 kHz
- Volume: -95.62 dB-0 dB
- Balance: -100 +100 (0 = center)
Control
- Ethernet:
- Connector type: RJ45 female connector
- Ethernet data rate: 10/100/1000 Base-T, full duplex with auto detect
- Power over Ethernet (PoE): Not supported
- RS-232:
- Connector type: 3-pole Phoenix connector
- Baud rates: Between 9600 and 115200 baud
- Data bits: 8
- Parity: None, Odd, Even
- Stop bits: 0/2
- Output voltage, low level: 3-15V
- Output voltage, high level: -15V – 3V
- USB:
- Host port (UFP): C-type receptacle, USB 2.0
- Host port: B-type receptacle, USB 2.0
- Device port (DFP): A-type receptacle, USB 2.0
- USB port: A-type receptacle, USB 2.0
- Service port: Mini B-type receptacle, USB 2.0
- GPIO:
- Connector type: 8-pole Phoenix
- Function (pin 1-6): Configurable input/output
- Function (pin 7): 5V output
- Function (pin 8): Ground
General
- Compliance:
- CE; UKCA
- IEC 61000-3-3:2013+AMD1:2017
- IEC/EN 55032:2015
- IEC/EN 55035:2017
- EN 63000:2018
- Operating temperature: 0° to +50°C (+32° to +122°F)
- Operating humidity: 10% to 90%, non-condensing
- Cooling: Cooling fan
- Power supply: External 160W Power Supply (if remote powering UCX-TPX-RX)
- Supported power source: 100-240 V AC; 50/60 Hz
- AC power plug: Interchangeable (EU, UK, JP/US, AUS/NZ)
- Battery cell type: BR1632A
- Enclosure material: 1 mm steel
- Dimensions: 271 W x 140.3 D x 26 H mm
- Dimensions: 10.7 W x 5.57 D x 1.01 H in
- Weight: 1040 g
- Warranty: 3 years
UCX-3×3-TPX-RX20
Video
- HDMI Outputs:
- Connector type: 3x HDMI Type A with screw locking option
- AV standard: DVI 1.0, HDMI 2.0
- HDCP compliance: HDCP 2.3
- Color space: RGB, YCbCr
- Supported resolutions at 8 bits/color: Up to 4096×2160@60Hz (4:4:4)
- Audio formats: 8-channel PCM, Dolby TrueHD, DTS-HD Master Audio 7.1
- TPX Input:
- Connector type: RJ45 connector
- Power over Ethernet: Not supported
- Data rate: 10GBase-T
- Compliance: AVXT
- HDCP compliance: HDCP 2.3
- Transferred signals: Video, Audio, USB 2.0, RS-232, OCS, Ethernet
- Color space: RGB, YCbCr
- Supported resolutions at 8 bits/color: Up to 4096×2160@60Hz (4:4:4)
- Audio formats: 8-channel PCM, Dolby TrueHD, DTS-HD Master Audio 7.1
- HDMI Inputs: 2x HDMI Type A with screw locking option
Audio
- Analog Audio Output:
- Connector type: 5-pole Phoenix connector
- Audio formats: 2-channel PCM
- Sampling frequency: 48 kHz
- Signal transmission: Balanced signals
Control
- Ethernet:
- Connector type: RJ45 female connector
- Number of connectors per unit: 3
- Ethernet data rate: 1GBase-T, full duplex with autodetect
- RS-232:
- Connector type: 3Pol Phoenix
- Default settings: 9600 BAUD, 8N1
- USB:
- 1x mini USB Type B (reserved for service)
- 1x USB Type A (reserved for future developments)
- 2x USB Type B (USB 3.1) for host devices
- 4x USB Type A (USB 3.1) for peripherals
- Room Occupancy Sensor: Connector type: 3Pol Phoenix
- GPIO: Connector type: 8Pol Phoenix
General
- Compliance:
- CE; UKCA
- EN 62368-1:2014
- EN 55032:2015
- EN 55035:2017
- EN 63000:2018
- Operating temperature: 0° to +50°C (+32° to +122°F)
- Operating humidity: 10% to 90%, non-condensing
- Cooling: Passive
- Power supply: External 80W Power Supply
- Supported power source: 100-240 V AC, 50/60 Hz
- Power consumption: 9W
- Power adaptor: 12V DC, 2A
- AC power plug: Interchangeable (EU, UK, JP/US, AUS/NZ)
- DC power plug: Locking DC connector (2.1/5.5 mm pin)
- Rack mountable: Yes, with mounting accessories
- Enclosure material: 1 mm steel
- Dimensions: 246 W x 140.3 D x 26 H mm
- Weight: 936 g
- Warranty: 3 years






