Description

OM200G IP-Telephony Systems

OM200G IP-PBX provides versatile solutions containing voice/video call, voice message broadcast, Fax, call recording, mobile extensions to fulfil an enterprise with 500 employees. The OM200G can connect IMS of operator, and provide multiple models with different combinations of FXO and FXS ports. The high availability featuring primary-standby, dual-redundant GigabitEthernet port and dual AC/DC power supplies allows the OM200G to be applied in many scenarios which are highly sensitive to reliability.

Always Connected with Your Customers

With features such as remote extension, call forking to your mobile phone and call-back, the OM200G assures you that wherever you are, whether in your office, traveling abroad, or working at home, you will never miss an important business call.
 

High Reliability

The OM200G provides high availability features including 1+1 redundancy of Gigabit-Ethernet ports and AC/DC power supplies (optional). In addition, with high availability featuring primary-standby, active-standby, as well as PSTN failover to handle the failure of the SIP proxy servers, power supply, and network, users are provided with carrier-class availability with minimized potential downtime
 

Easy Remote Management

Embedded with New Rock Cloud client, the device located behind enterprise NAT or firewall can be easily accessed for maintenance and troubleshooting or by far-end applications. Real-time monitoring, alarm notification, remote-packet capture and software upgrading can be performed with New Rock Unified Management System or third-party Element Management Systems connecting over TR-069 or SNMP protocols.

Multi-Site Networking, Unified Management

The peer-to-peer communication allows the OM200G to be easily accessed by remote OM IP-PBX, MX gateways, IP phones, mobile extensions, so all extensions of headquarters and branches call each other for free and all trunks can be shared. The unified management of call recordings and call histories is achieved too

Product models

With modular design, the capacity of OM200G can be flexibly expanded by mixing up to 4 interface cards listed below.
 

Interface cards

24FXS, 24FXO, 16FXS+8FXO, 12FXS+12FXO

Features

• Connected to IMS Networks via ONU
• Peer-to-peer communication between OM IP-PBX and SIP terminals across NAT without the need for static IP addresses, DDNS or port mapping on the access router
• Headquarters and branch-office communications through SIP-based tie trunks
• Mobile extensions keep you connected anywhere, at any time on any network
• Plug-and-play for New Rock IP phones
• XML/HTTP-based RESTful API for third-party applications
• Remote access via the New Rock Cloud
• Management with New Rock Unified Management System or third-party Equipment Management Systems (TR-069, SNMP)
• Dual-redundant Gigabit-Ethernet ports
• Dual AC/DC power supplies (optional)
• Class I lightning protection

Specification

Protocols

• Call control : SIP/UDP and SIP/TCP (RFC3261), IMS (3GPP)
• Network : Telnet, SSH, HTTP, HTTPS, DHCP/PPPoE client, DNS (A/SRV record), STUN

Media Processing

• Caller ID : Bellcore Type 1&2, ETSI, BT, NTT, and DTMFbased CID
• Codec : G.711 (a/μ), G.729a
• DTMF : In-band audio, RFC2833, SIP-INFO
• Hook-flash : Local processing, RFC2833, SIP-INFO
• Fax over IP : 
  T.38, G.711 pass-through
  T.38 compliant Group 3 Fax Relay
  Maximum fax rate of 33,600 bps (pass-through)
• Disconnect modes : Polarity reversal, Busy tone detection, Loop current
• Voice-quality enhancement :
  Echo cancellation (G.168-2004), Jitter buffer
   

Voice

• Smart auto attendant/ Receptionist : 
  Business/non-business hours/holiday, Music on hold, Attendant group, Multilingual/multi-level IVR, Auto attendant profiles, VIP service
• Dialing : Speed dial, Outgoing route selection, Least cost routing, Automatic route selection
• Call settings : Call transfer, Call forward, Do not disturb, Barge, Silent monitoring, Simplified DISA etc.
• Call recording : Through internal storage or New Rock pbx record software
• Voicemail : MWI (polarity reversed, FSK, high voltage)
• Analog trunk : Caller ID, Polarity reversal detection
• SIP trunk : IMS, Multiple SIP servers, Skype Connect
• Phone status indication : Status subscription (BLF)

Security

• User-defined portsl : SIP port, RTP port, HTTP/HTTPS port to access the Web GUI
• Access list : IP addresses allowed to access HTTP/HTTPS/ Telnet/SSH service, IP address filtering of SIP
• IP phone protection : Prohibition on outgoing dialing by IP extensions on public network, User-Agent authentication, Registration password cracking protection
• Web GUI login protection : Prohibition on login from public IP address, Login password cracking protection
• Encryption : Encryption on SIP signaling or/and media streams. Importing and exporting encrypted configuration file and password/PIN
• Security level : Three levels of security settings

Provisioning, Administration and Maintenance

• Device management : New Rock Unified Management System, TR-069 management (TR-069, TR-104, and TR-106), SNMP
• Remote access over TCP : New Rock Cloud
• Auto provisioning : Download configuration file via TFTP/FTP/HTTP/ HTTPS, Obtaining ACS address via DHCP option 66 or redirection
• Log : 8-level log management, Syslog, Internal USB flash drive (16 GB)
• Data capture : Port capture, Packet capture
• Configuration : Bulk import/export. Resetting to the factory default
• Status and statistic : Call status and history, Device status monitoring and statistics collection
• Monitoring/alarming : Status/performance monitoring or reporting. Status/performance alarms

Other

• Multi-site voice : Uniform dial plan, Call forward, Call transfer. Outbound-trunk sharing, Three-way calling, Attendant on remote site
• QoS : DiffServ, TOS, 802.1p/Q VLAN tagging
• Internal storage : Local recording, Voicemail, Customer information, User-uploaded IVR file

Hardware

• CPU : 1 GHz
• Voice DSP module : 200 MHz, 3-12 modules
• RAM : 256 MB, DDR3
• Flash : 32 MB
• Internal USB flash drive : 16GB
• Net weight : 6.3 kg maximum
• Voice DSP module : 200 MHz, 2 to 6 modules
• Single/Dual AC power supplies : 100 to 240 VAC, 50/60 Hz, 2A maximum
• Single/Dual DC power supplies : -36 to -72 VDC, 4A
• Power consumption : 110 W maximum
• Mounting : Rack
• Operating : Temperature: 0 to 40°C Humidity: 10 to 90% RH (non-condensing)
• Storage : Temperature: -40 to 70°C Humidity: 5 to 90% RH (non-condensing)