Description
OVERVIEW
Projection That Makes Work Life Easy
More professionals choose Panasonic because our products are engineered for purpose based on end-user feedback, providing real-life features, performance, and value to meet the needs of educators and businesspeople.
Compact Projectors Deliver High Brightness
Brilliant images are possible even in rooms with high artificial light levels. Text is reproduced clearly and legibly, while graphics and video retain excellent color saturation and contrast.
Daylight View Basic
Panasonic’s Daylight View Basic technology achieves sharp, easily viewed images by enhancing detail, particularly in dark areas of the image that are normally difficult to see in brightly lit rooms. A built-in sensor measures ambient light while Daylight View Basic adjusts halftone color and brightness according to the surrounding level of illumination.
Color Adjustment for Multi-screen Projection
This function corrects subtle variations in the color reproduction range of individual units set up for multi-screen projection, particularly in side-by-side configuration.
Long Lamp Replacement Cycle of 5,000 hours
Lamp replacement of up to 5,000 hours* significantly reduces cost of operation, labor, and wastage by extending operation between lamp maintenance.
Dust-Resistant Cabinet
If dust gets inside the projector’s optical unit, brightness suffers. The unit is protected against dust intrusion with a one-way airflow design and improved sealing for the lens block, air intake duct, and Eco Filter.
Eco Filter Extends Replacement Cycle to 15,000 Hours
The Eco Filter has a Micro Cut Filter that collects minute dust particles with an electrostatic effect. It combines with a dust-resistant projector cabinet to enable long-term use even in punishing conditions. A long maintenance cycle of up to 15,000 hours*1 reduces hassle, and the eco-friendly unit*2 can be reused.
*1 Usage environment affects filter maintenance cycle.
*2 Please follow the procedures listed in the operating instructions when washing filter with water. Replacement is recommended after filter has been washed and reused twice, or if filter is not sufficiently clean after washing.
ECO Management System
Push the ECO button on the remote control to set up Eco Management functions, including automatic brightness reduction in dim ambient lighting conditions, and power consumption reduction when no input signal is detected.
Easy Lamp and Filter Replacement
To reduce hassle, the filter can be replaced via the side and the lamp from the top of the projector. There’s no need to remove the unit from its ceiling mount for periodic maintenance.
Additional Features
- Multi Monitoring & Control Software
- Art-Net DMX, Crestron Connected™, and PJLink™
- DICOM Simulation Mode
- Lens-Centered Design
- Screen Adjustment for Specially Shaped Screens
SPECIFICATIONS
| Power supply | 100–240 V AC, 50/60 Hz |
|---|---|
| Power consumption*1 | 461 W (0.5 W with Standby Mode set to Eco*1, 12 W with Standby Mode set to Normal); 424 W with Lamp Power set to Normal, 305 W with Lamp Power set to Eco |
| LCD panel | |
| Panel size | 16.0 mm (0.63˝) diagonal (4:3 aspect ratio) |
| Display method | Transparent LCD panel (x 3, R/G/B) |
| Drive method | Active matrix |
| Pixels | 786,432 (1024 x 768) x 3, total of 2,359,296 pixels |
| Lens | |
| PT-EX520 | 1.8 x powered zoom (throw ratio 1.32–2.44:1), powered focus F 1.6–2.2, f 17.1–31.7 mm |
| PT-EX520L | Optional powered zoom/focus lenses and fixed-focus lens |
| Lamp | 320 W UHM lamp x 1, lamp replacement cycle (Lamp Power: Normal/Eco): 4,000 hours/5,000 hours*2 |
| Screen size (diagonal) | 1.05–10.77 m (40–400˝), 4:3 aspect ratio |
| Brightness*3 | 5,300 lm (Lamp Power: Normal, Dynamic Mode, Iris: OFF, Daylight View: OFF, Auto Power Save: OFF) |
| Contrast*3 | 2,000:1 (Lamp Power: Normal, Dynamic Mode, Iris: ON, Daylight View: OFF, Auto Power Save: OFF) |
| Resolution | 1024 x 768 pixels*4 |
| Supported RGB signal | XGA–WUXGA |
| Supported video signal | NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i |
|
Optical axis shift (from center of screen) |
|
| Vertical | ±50 % (powered) |
| Horizontal | ±30 % (powered) |
| Keystone correction range*5 | Vertical: ±25 °, horizontal: ±30 ° |
| Installation | Ceiling/floor, front/rear |
| Operation noise*3 | 35 dB (Lamp Power: Normal), 29 dB (Lamp Power: Eco) |
| Cabinet materials | Molded plastic (PC + ABS) |
| Dimensions (W x H x D) | |
| PT-EX520 | 498 x 145*6 x 398.3 mm (19 19/32˝ x 5 11/16˝*6 x 15 11/16˝) (with supplied lens) |
| PT-EX520L | 498 x 145*6 x 358 mm (19 19/32˝ x 5 11/16˝*6 x 14 3/32˝) (with supplied lens) |
| Weight*7 | |
| PT-EX520 | Approximately 8.4 kg (18.5 lbs) (with supplied lens) |
| PT-EX520L | Approximately 7.7 kg (17.0 lbs) (without lens) |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)*8, operating humidity: 20–80 % (no condensation) |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software |
| TerminalsPT-EX520 / EX520L |
|
*1 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
*2 This is the maximum value when the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more frequently or kept on for a long time, lamp replacement cycle will be reduced. Usage environment affects the duration of the lamp.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Input signals that exceed supported resolution will be converted.
*5 With the supplied lens. Value differs when the correction for both directions is operated.
*6 With legs at shortest position.
*7 Average value. May differ depending on models.
*8 At altitudes below 1,400 m (4.593 ft) above sea level. Operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when used at altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level. Also, if ambient temperature exceeds 40 °C (104 °F) (35 °C [95 °F] at high altitude), lamp power automatically switches to Eco to in order to protect the projector.
