Description
OVERVIEW
High Brightness and Excellent Contrast
Despite its sleek and compact dimensions, the PT-EZ770 Series produces a class-leading 6,500 lm to 7,500 lm* of brightness with a contrast ratio of 5,000:1. The iris automatically adjusts to suit ambient lighting conditions.
* The PT-EX800/EX800ZL has 7,500 lm, the PT-EW730Z/EW730ZL has 7,000 lm, and the PT-EZ770Z/EZ770ZL has 6,500 lm of brightness.
The Daylight View Basic Function Ensures Clear Images Even in Brightly Lit Rooms
Panasonic‘s Daylight View Basic technology achieves sharp, easy-to-see images by clearly reproducing the details in dark image areas, which were previously difficult to see in brightly lit rooms. A built-in sensor measures the ambient light, and the Daylight View Basic function adjusts the halftone color and brightness level according to the surrounding illumination.
Color Adjustment Function
A color adjustment function allows you to easily correct for slight variations in the color reproduction range of individual units set up for multiple projection, particularly in side-by-side configuration. Correction is performed on 3 colors (R, G, B) or 7 colors (R, G, B, C, M, Y, W).
DIGITAL LINK Transmits Digital Signals up to 100m (328 ft) with a Single Cable
Equipped with a DIGITAL LINK terminal, the PT-EZ770 Series allows transmission of HDMI, uncompressed HD digital video, audio and control signals (Ethernet, RS-232C) for up to 100 meters (328 feet) through a single CAT5e (STP) cable or higher. This simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.
Optional ET-YFB100G Digital Interface Box for Easy Setup
By combining the optional ET-YFB100G Digital Interface Box, with its HDMI and other input terminals, uncompressed HD digital video, audio and control signals can be transmitted up to 100 m (328 feet) over a single CAT5e (STP) cable or higher. It allows projector connection with only one cable, making it ideal for ceiling-mounted and other permanent installations.
Also, because control signals can be simultaneously transmitted, the ET-YFB100G input signal can easily be switched with the wireless remote control that is included with the projector. The projector can be controlled by either serial or LAN communication
A Dust-Resistant Cabinet Design and an Eco Filter that Needs No Replacement for 15,000 Hours
The cabinet is designed with a straight airflow path, from intake to exhaust.
The shielding of the lens section, where dust is likely to enter, has been further improved to keep dust out. And the sealing performance of the air filter unit and air intake duct has been increased to prevent the entry of dust from the filter periphery, resulting in a highly dust-resistant structure.
The Eco Filter unit, which efficiently captures dust in the intake airflow path, requires no replacement for up to15,000 hours.* This large, pleated Micro Cut Filter (electrostatic filter) uses an ion effect to trap minute dust particles, further raising the overall dust-trapping capability.
These features minimize the entry of dust into the optical block and maintain brightness over a long period of time, while reducing the hassle of maintenance. Also, in addition to achieving a long replacement cycle, the Eco Filter can be washed with water** and reused as an environmental consideration.
* The usage environment affects the duration of the filter.
** When washing with water, please follow the procedures listed in the operating instructions. Also, we recommend replacing the filter with a new one after it has been washed and reused twice. If the filter is not sufficiently clean after washing, replace it with a new one.
Long Lamp Replacement Cycle of 4,500 hours
The PT-EX800 Series projectors feature a lamp replacement cycle of up to 4,500 hours.* This helps to lower operating costs by providing longer usage between lamp replacements.
* This is the maximum value when the lamp power is set to Eco2. Increases in the lamp on cycle or extended use with the lamp continuously turned on will shorten the lamp replacement cycle. When the lamp power is set to Eco1, the lamp replacement cycle is 4,000 hours and 3,000 hours when setting to Normal. The usage environment affects the lamp replacement cycle.
Intelligent Lamp Control System Reduces Power Consumption
When the lamp power is set to Auto, the Intelligent Lamp Control system automatically adjusts the lamp output in accordance with the brightness of the projected image and reduces it by up to 58 %*. It also combines with color shift correction, which corrects the shift in the color balance that occurs when the lamp output drops. As a result, power consumption is effectively reduced while excellent color reproduction is maintained.
* With the lamp power set to Auto.
ECO Management Functions
A number of functions are provided to reduce power consumption. They adjust the brightness according to ambient light conditions, and reduce the lamp power when there is no signal input. You can easily set the Eco Management functions according to operating conditions by using the ECO button on the remote control.
"ECO" button on the remote control
Easy Lamp and Air Filter Replacement
For easy maintenance, you can replace the filter from the side and the lamp from the top of the projector.
The filter and lamp are easily replaced even after the projector is installed on the ceiling.
SPECIFICATIONS
PT-EX800 / EX800Z / EX800ZL
Model | PT-EX800 / EX800Z/ EX800ZL* | |||
---|---|---|---|---|
Power supply | 100-240 V AC, 50/60 Hz | |||
Power consumption |
575 W (0.3 W when STANDBY MODE set to ECO*1, 10 W when STANDBY MODE set to NORMAL (37 W when STANDBY MODE of AUDIO SETTING set to ON)) |
|||
LCD panel | Panel size |
20.0 mm (0.79 in) diagonal (4:3 aspect ratio) |
||
Display method | Transparent LCD panel (x 3, R/G/B) | |||
Drive method | Active matrix | |||
Pixels |
786,432 (1,024 x 768) x 3, total of 2,359,296 pixels |
|||
Lens |
PT-EZ770Z/ EW730Z/ EX800Z |
Powered zoom (throw ratio 1.7-2.8:1), powered focus F 1.7-2.3, f 26.9-45.4 mm | ||
PT-EZ770ZL/ EW730ZL/ EX800ZL |
Optional powered zoom/focus lenses and fixed-focus lens | |||
Lamp |
400 W UHM lamp x 1, lamp replacement cycle (lamp power: Normal/Eco1/Eco2): 3,000 hours/4,000 hours/4,500 hours*2 |
|||
Screen size (diagonal) |
1.02-10.16 m (40-400 in), 1.52-10.16 m (60-400 in) with the ET-ELW22, 4:3 aspect ratio |
|||
Brightness*3 |
7,500 lm (lamp power: Auto/Normal, Dynamic mode, Standard lens) |
|||
Center-to-corner uniformity*3 | 90 % | |||
Contrast*3 | 5,000:1 (full on/full off, lamp power: Auto, iris: On) | |||
Resolution | 1,920 x 1,200 pixels*4 | 1,280 x 800 pixels*4 | 1,024 x 768 pixels*4 | |
Scanning frequency |
DVI-D/ HDMI/ DiplayPort/ DIGITAL LINK |
Dot clock: 25-162 MHz (VGA: 640 x 480 pixels to WUXGA: 1,920 x 1,200 pixels, VESA CVT-RB compliant) |
||
RGB |
fH: 15-91 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower (Signals exceeding the dot clock rate of 162 MHz are downsampled.) |
|||
YPBPR (YCBCR) |
fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)] fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p] fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i] fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p] fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF] fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)] fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p] fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i] fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p] fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p] fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p] |
|||
Video/YC |
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
|||
Optical axis shift*5 | Vertical |
±50 % (±35 % with the ET-ELW22) from center of screen (powered) |
||
Horizontal | ±10 % from center of screen (powered) | |||
Keystone correction range*6 | Vertical ±40°, horizontal ±30° | |||
Installation | Ceiling/floor, front/rear | |||
Built-in speaker | 3.7 cm round shape x 1, output power 10.0 W (monaural) | |||
Terminals | DVI-D IN |
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
||
HDMI IN |
HDMI 19-pin x 1 (Deep Color, compatible with HDCP), audio signal: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz) |
|||
DisplayPort IN |
DP-20P x 1 (DisplayPort 1.1, compatible with HDCP), audio signal: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz) |
|||
RGB 1 IN | D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1) | |||
RGB 2 IN |
BNC x 5 (RGB or YPBPR/YCBCR/YC/VIDEO IN x 1) shared with VIDEO IN (S-video/composite video) |
|||
VIDEO IN | Pin jack x 1 (composite video) | |||
MONITOR OUT | D-sub HD 15-pin (female) x 1 (RGB x 1) (not compatible with all inputs) | |||
AUDIO IN | Pin jack x 2 (L/R x 1), M3 x 2 (L-R x 2) | |||
AUDIO OUT | M3 x 1 (L-R x 1) for output (variable) | |||
SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |||
REMOTE 1 IN | M3 x 1 for wired remote control | |||
REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |||
LAN / DIGITAL LINK |
RJ-45 x 1 (for network and DIGITAL LINK (video/audio/network/serial control) connection, 100Base-TX, compliant with PJLink™, HDCP compatible, Deep Color compatible) |
|||
Operation noise*2 | 37 dB (lamp power: NORMAL), 31 dB (lamp power: ECO 1), 29 dB (lamp power: ECO 2) | |||
Filter | x 1, recommended replacement cycle: 15,000 hours*7 | |||
Cabinet materials | Molded plastic (PC + ABS) | |||
Dimensions (W x H x D) |
PT-EZ770Z/ EW730Z/ EX800Z |
530 x 177*8 x 445 mm (20-7/8 x 6-31/32*8 x 17-1/2 in) (with supplied lens) | ||
PT-EZ770ZL/ EW730ZL/ EX800ZL |
530 x 177*8 x 385 mm (20-7/8 x 6-31/32*8 x 15-5/32 in) (without lens) | |||
Weight*9 |
PT-EZ770Z/ EW730Z/ EX800Z |
Approximately 10.6 kg (23.4 lbs) (with supplied lens) | ||
PT-EZ770ZL/ EW730ZL/ EX800ZL |
Approximately 9.8 kg (21.6 lbs) (without lens) | |||
Operating environment |
Operating temperature: 0-45 °C (32-113 °F)*10, operating humidity: 10-80 % (no condensation) |
|||
Supplied accessories |
Power cord (including power cord holder) x 1*11, wireless/wired remote control unit x1, batteries for remote control (AAA/R03/LR03 type) x 2, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) x 1 |
* The PT-EZ770ZL/EW730ZL/EX800ZL delivers the same performance as the PT-EZ770Z/EW730Z/EX800, but comes without a lens.
*1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
*2 This is the maximum value when the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten. The usage environment affects the duration of the lamp.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Input signals that exceed the native resolution will be converted to the native resolution.
*5 The axis shift function cannot be used with the ET-ELW21.
*6 With the supplied lens. Value differs when the correction for both directions is operated.
*7 The usage environment affects the duration of the filter.
*8 With legs at shortest position.
*9 Average value. May differ depending on models.
*10 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when used at altitudes between from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level. Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) at high altitude), the LAMP POWER may be automatically switch to Eco 2 to in oeder to protect the projector.
*11 Power cords available (x2) for the UK and Asia only.